Effect Pedal building
Moderators: pompeiisneaks, Colossal
Re: Effect Pedal building
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Re: Effect Pedal building
What cracks you up? The cute logo or the price of it? I can't see spending that much for a pedal, but the case is nice.
I built one for RJ for about 40 bucks, but no dick logo. Lol
I built one for RJ for about 40 bucks, but no dick logo. Lol
Re: Effect Pedal building
Yeah, no, the logo cracks me up. The price is quite attractive, only $15 for the bare PCB (which I just ordered), and only $179 for a complete pedal. Not bad at all, considering Nik wants $85 JUST for the enclosure (not faulting him here either--that's a nice, custom-cast thang, thar).
I build and repair tube amps. http://amps.monkeymatic.com
Re: Effect Pedal building
I agree about the enclosure, it is like the real thing, and looks like you could park a jeep on it without hurting it.
It is a cool pedal and the charge pump gives the pedal a big sound.
You should like it. If you can put in a few sip rails, where the diodes go, you can try different ones out. I think I used IN60's I think
They seemed to give me well rounded overdrive
Good luck with it.
It is a cool pedal and the charge pump gives the pedal a big sound.
You should like it. If you can put in a few sip rails, where the diodes go, you can try different ones out. I think I used IN60's I think
They seemed to give me well rounded overdrive
Good luck with it.
- pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: Effect Pedal building
Just finished a build using the the Rullywow Queen of Bone pcb which is a King of Tone varient... Nice Board! Pedal sounds great...
You do not have the required permissions to view the files attached to this post.
I brake for Lard......
Re: Effect Pedal building
Nice build with 4 dip switches to adjust for over the top tone, right!
Mark
Mark
Re: Effect Pedal building
Yeah Mark... A fun pedal... one side is like a clean boost and the otherside is a variant of the Marshall blues-breaker pedal ..The dip switch gives you varying degrees of cleanliness and distortion... you can play each side separate or both sides combined... I leave mine on my board set heavy on the boost side and light on the distortion side..
I brake for Lard......
Re: Effect Pedal building
Here is one of the easiest pedals I have built and by far the craziest sounding... It's a fuzz pedal with infinite settings.. It's modeled after the Zvex Fuzz Factory... Bizarre crazy stuff
You do not have the required permissions to view the files attached to this post.
I brake for Lard......
Re: Effect Pedal building
Awesome! Where's the PCB? I want one!
I build and repair tube amps. http://amps.monkeymatic.com
Re: Effect Pedal building
Playonit I have a friend that would love that pedal, if you want to build one let me know my cost.
Re: Effect Pedal building
Which Pedal Mark? the Queen of Bone or the Fuzz Factory type?
I brake for Lard......
Re: Effect Pedal building
I brake for Lard......
Re: Effect Pedal building
I build and repair tube amps. http://amps.monkeymatic.com
Re: Effect Pedal building
Awesome.... give us an update when done.... I have built a lot of pedals using Aion Boards especially their Zen Drive, OCD and Klon board variants... he has great boards...xtian wrote: ↑Sun Sep 10, 2017 12:41 am Thanks!
I decided to give this one a try: https://aionelectronics.com/project/flare-fuzz-factory/
I brake for Lard......