AC-30 Lyle Caldwell mods link.

Vox and Hiwatt Discussion

Moderators: pompeiisneaks, Colossal

Post Reply
Mark
Posts: 2998
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

AC-30 Lyle Caldwell mods link.

Post by Mark »

I've seen people mention it but not put the link up.

http://www.ac30-guide.com/?page_id=524
Yours Sincerely

Mark Abbott
jcsifu
Posts: 271
Joined: Sun May 23, 2010 4:29 am
Location: California

Re: AC-30 Lyle Caldwell mods link.

Post by jcsifu »

Here is the corresponding schematic, hard to find on the web so thought I would post it.
You do not have the required permissions to view the files attached to this post.
Mark
Posts: 2998
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: AC-30 Lyle Caldwell mods link.

Post by Mark »

Thanks much appreciated.
Yours Sincerely

Mark Abbott
User avatar
rp
Posts: 2528
Joined: Sun Apr 25, 2010 4:21 am
Location: Italy

Re: AC-30 Lyle Caldwell mods link.

Post by rp »

A friend bought on of these used, I'm not there to tweak it for him but I was wondering why the h#ll Vox would change the 220K plate resistors on the input tubes to 100K, that really are part of the Vox sound. All I can figure is that since the two channels are mixable in the AC30CC (they are modded to be in phase in the CC version) maybe Vox found that 100K allowed the mix function to sound better. Something to keep in mind if you change it but like the blend function.
User avatar
schaublin65
Posts: 88
Joined: Sun Jul 08, 2012 11:59 am
Location: Ireland

Re: AC-30 Lyle Caldwell mods link.

Post by schaublin65 »

Hi,

thanks for this. Interesting to see.

take care..

John
tenchijin2
Posts: 3
Joined: Sat Apr 25, 2015 8:16 pm

Re: AC-30 Lyle Caldwell mods link.

Post by tenchijin2 »

I have done these simple mods myself! I didn't do a careful A/B but I can say the amp has a very interesting character now. Very full and rich sounding. I'm currently in the middle of installing the London Power scaling kits in the amp now.
Post Reply