I'm reusing the DV Mark chassis and iron, along with the Marshall PCB from Andrea to build out a "plexi".
Space constraints mean I have to lay the preamp tubes down, and fab a riser for the power tubes.
2024 Monkeymatic Fiddy 1987
Moderators: pompeiisneaks, Colossal
2024 Monkeymatic Fiddy 1987
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2024 Monkeymatic Fiddy 1987
@frusciante89 : I sent you an email yesterday. Ran into trouble with this PCB. Hope you have your ears on!
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2024 Monkeymatic Fiddy 1987
I'm not keen on the OT being so close to the input stages. A screening plate can help to keep things stable in that type of scenario so perhaps think about how one might be squeezed in before everything is set in stone.
My band:- http://www.youtube.com/user/RedwingBand