Marshall - It's Alive & Kickin
Moderators: pompeiisneaks, Colossal
Marshall - It's Alive & Kickin
Hi Guys,
Just wanted to post some awful pics of a soon to be marshallish build.
Ampmike built the cab. Amazing work.
The pics don't come anywhere near doing it justice.
A huge Thank You to Mike.
It is stunning !
Brittish racing green.
Weber chassis & Mojo plates. Thanks to Mark Fowler.
This amp will have to be a bit special...
Heyboer TW PT, Mercury JTM45 OT & choke.
Got to clear the bench before I start...
Just wanted to post some awful pics of a soon to be marshallish build.
Ampmike built the cab. Amazing work.
The pics don't come anywhere near doing it justice.
A huge Thank You to Mike.
It is stunning !
Brittish racing green.
Weber chassis & Mojo plates. Thanks to Mark Fowler.
This amp will have to be a bit special...
Heyboer TW PT, Mercury JTM45 OT & choke.
Got to clear the bench before I start...
You do not have the required permissions to view the files attached to this post.
Last edited by Bob S on Sun Jan 27, 2013 2:54 pm, edited 1 time in total.
Why Aye Man
Re: Marshall - It's Alive & Kickin
* excited! *
If you're going to order resistors and caps, consider ordering duplicates for me. Let me know!
If you're going to order resistors and caps, consider ordering duplicates for me. Let me know!
I build and repair tube amps. http://amps.monkeymatic.com
Re: Marshall - It's Alive & Kickin
Very nice looking Bob.
Great job Mikey.
Great job Mikey.
Re: Marshall - It's Alive & Kickin
Nice job!
Just finishing up my combo cab today prior to covering.
Also had an email from MC that the 50w multi HV PT will be available end of January, looking forward to that
I will post some pics up soon, also had a neat little nameplate made up by Modulus in the old Marshall block logo style.
JCM800 style, carefully modded and running in a vintage very British style cab - a fitting tribute to Jim Marshall.
For a change and partly because of the crazy price of 18 and 15mm Baltic birch ply in the UK, I used a 8.75" 21mm pine board for the box with an 18mm MDF baffle. Feels pretty light for a 50w so far!
Just finishing up my combo cab today prior to covering.
Also had an email from MC that the 50w multi HV PT will be available end of January, looking forward to that
I will post some pics up soon, also had a neat little nameplate made up by Modulus in the old Marshall block logo style.
JCM800 style, carefully modded and running in a vintage very British style cab - a fitting tribute to Jim Marshall.
For a change and partly because of the crazy price of 18 and 15mm Baltic birch ply in the UK, I used a 8.75" 21mm pine board for the box with an 18mm MDF baffle. Feels pretty light for a 50w so far!
- Reeltarded
- Posts: 9961
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Marshall - It's Alive & Kickin
Oh no! Bob's gone green! I need to torch a gallon of gas on my lawn to offset this tragedy.
Looks great! Let's see some gut shots...
Looks great! Let's see some gut shots...
Re: Marshall - It's Alive & Kickin
Very nice Bob, looks great!
Re: Marshall - It's Alive & Kickin
This may come in handy for anyone using this chassis, so I thought I'd keep
updating.
Nuts & bolts stuff almost done.
Added a 9 pin socket - real close to the input jacks.
It'll be either very quiet or the other thing...
With TW clones I've had good luck with V1 as close as possible to the input.
Still debating about which pre-amp.
Ideally I'd like another 9 pin socket to play with.
Added a foot switch socket & 3 over-ride switches.
I'm thinking 3 relays will be added later.
updating.
Nuts & bolts stuff almost done.
Added a 9 pin socket - real close to the input jacks.
It'll be either very quiet or the other thing...
With TW clones I've had good luck with V1 as close as possible to the input.
Still debating about which pre-amp.
Ideally I'd like another 9 pin socket to play with.
Added a foot switch socket & 3 over-ride switches.
I'm thinking 3 relays will be added later.
You do not have the required permissions to view the files attached to this post.
Why Aye Man
- Reeltarded
- Posts: 9961
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Marshall - It's Alive & Kickin
More than twice what I got done today! I like the tube over there. I think that probably works fine.
You lay the stuff out on the deck like you might have done this before.
You lay the stuff out on the deck like you might have done this before.
- dorrisant
- Posts: 2636
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Marshall - It's Alive & Kickin
Nice!
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: Marshall - It's Alive & Kickin
My least favorite thing - filament wiring.
1st attempt late last night.
This morning somehow it had transformed into the ugliest wiring job ever.
Re-did this morning - color coded to avoid phasing issues.
Still managed to get the phasing wrong - AAArghh.
Third attempt looks good enough - I really don't want to re-do it again.
I was intending to use a grounded CT.
Now I'm thinking elevated.
The wiring is quite close to the input jacks.
May end up with dc filaments.
1st attempt late last night.
This morning somehow it had transformed into the ugliest wiring job ever.
Re-did this morning - color coded to avoid phasing issues.
Still managed to get the phasing wrong - AAArghh.
Third attempt looks good enough - I really don't want to re-do it again.
I was intending to use a grounded CT.
Now I'm thinking elevated.
The wiring is quite close to the input jacks.
May end up with dc filaments.
You do not have the required permissions to view the files attached to this post.
Why Aye Man
Re: Marshall - It's Alive & Kickin
So true. I tried just wiring them in parallel straight across the amp like the SLO style. Dead quiet and no twisting. Wiring filaments sucksBob S wrote:My least favorite thing - filament wiring.
Re: Marshall - It's Alive & Kickin
50 watt Plexi clone, in green, that i buit up a couple of yrs ago---- head cab from Mojotone (via ebay---it's a "2nd")--- mostly leftover Metro parts: chassis, face/back plates, turretboard, PT--- Magnetic Components OT --- Lar/Mar PPIMV on back--- running NOS RFT EL34's and good used old production preamp tubes:
[IMG:800:600]http://i46.photobucket.com/albums/f112/ ... 38919a.jpg[/img]
[IMG:800:600]http://i46.photobucket.com/albums/f112/ ... f83b17.jpg[/img]
[IMG:800:600]http://i46.photobucket.com/albums/f112/ ... 38919a.jpg[/img]
[IMG:800:600]http://i46.photobucket.com/albums/f112/ ... f83b17.jpg[/img]
Marshall cab
Hey Guys,My marshall style cab is done.Used up brown scraps and its ready to house this new amp.Parts are coming friday!!!I guess this should be in the Marshall sec.Cant wait to start a nice winter build thanx to Bob S.Mikey
You do not have the required permissions to view the files attached to this post.
Last edited by ampmike on Sun Jan 20, 2013 2:18 pm, edited 1 time in total.
Custom Built Amps for Sale!http://faithamps.weebly.com/
- Reeltarded
- Posts: 9961
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Marshall - It's Alive & Kickin
This place isn't helping me get any work done.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Marshall - It's Alive & Kickin
Nice amps/cabs guys