Amplifier Startup Test
Moderators: pompeiisneaks, Colossal
Amplifier Startup Test
I built a Two Stroke years ago, but have completely forgotten the procedures for firing up a new amp build. I have a dummy load, lightbulb current limiter, and a variac. Can I get a checklist of startup procedures and tests to do on a new amp? I’m ready to fire up my Hoffman Princeton Reverb build. Thanks!
Re: Amplifier Startup Test
Rob has a good guide here: https://robrobinette.com/Tube_Amp_Startup.htm
I build and repair tube amps. http://amps.monkeymatic.com
Re: Amplifier Startup Test
Thanks xtian! This is the doc I remember. I don’t know what’s been going on with internet search functions lately, but I can’t seem to find things like I did before. Bookmark and print out this time! Responded to you over on The Gear Page, too.