Mesa schematic

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Stevem
Posts: 4602
Joined: Fri Jan 24, 2014 3:01 pm
Location: 1/3rd the way out one of the arms of the Milkyway.

Mesa schematic

Post by Stevem »

Anyone have a schematic for a 2016 Mesa mark V?

Thanks in advance !

Also what’s a good non addictive pain killer for the headache I am going to have from working on this 10 lbs of crap in a 2lb bag?😊

This dam thing has atleast 32 relays in it!!!!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!😊

Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
User avatar
martin manning
Posts: 13325
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: Mesa schematic

Post by martin manning »

maxkracht
Posts: 610
Joined: Tue Dec 10, 2019 7:18 pm
Location: Iowa, USA

Re: Mesa schematic

Post by maxkracht »

Stevem wrote: Mon Aug 28, 2023 11:10 pm Also what’s a good non addictive pain killer for the headache I am going to have from working on this 10 lbs of crap in a 2lb bag?

This dam thing has atleast 32 relays in it!!!!
Good luck! I had a Zinky in the shop recently that had at least that many relays if not more, and everything was covered in hot glue and/or inaccessible from the chassis design. I told him to come back when something major breaks because I didn't want to deal with it. At least that mesa has a sort of open layout, aside from stacked boards and too many ribbon cables...
Stevem
Posts: 4602
Joined: Fri Jan 24, 2014 3:01 pm
Location: 1/3rd the way out one of the arms of the Milkyway.

Re: Mesa schematic

Post by Stevem »

That’s for the schematic link.

Well in checking with the schematic the amps issue is thank God not relay related, it looks like the regulator for the 12 vdc heater is bad.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!😊

Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Stevem
Posts: 4602
Joined: Fri Jan 24, 2014 3:01 pm
Location: 1/3rd the way out one of the arms of the Milkyway.

Re: Mesa schematic

Post by Stevem »

So unlike the mark V schematic at el34 world, this mark V has 3 preamp tubes that run on dc filiments which is the trouble area in this amp I have.

Anyone seen a schematic for this circuit?
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!😊

Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Post Reply