Eico 666 settings for 6JE6c-6LQ6

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
pickerel
Posts: 3
Joined: Tue May 01, 2007 6:47 pm
Location: Colonia NJ

Eico 666 settings for 6JE6c-6LQ6

Post by pickerel »

Hi.Can any one help me with the proper settings for 6JE6 type tubes ,they are not listed on my chart. I have a 666 tester with 610A adapter. Thank you!
User avatar
juse
Posts: 38
Joined: Wed Aug 15, 2007 5:07 pm
Location: Dallas, TX

Re: Eico 666 settings for 6JE6c-6LQ6

Post by juse »

Try this:

6JE6

FIL: 6.3
GR: 90
PL: 50
LEVERS: 65121 63164
V: 2
S: 1
LEAK: 2-3-7-C
MERIT: C

--------------------------

Hope this helps.
wawa
Posts: 20
Joined: Mon May 07, 2007 3:04 pm
Location: winnipeg

Re: Eico 666 settings for 6JE6c-6LQ6

Post by wawa »

I have this same tester. do you have settings for EL34? There were so many revisions I'm not sure if mine is correct. Thanks in advance.
User avatar
juse
Posts: 38
Joined: Wed Aug 15, 2007 5:07 pm
Location: Dallas, TX

Re: Eico 666 settings for 6JE6c-6LQ6

Post by juse »

wawa wrote:I have this same tester. do you have settings for EL34? There were so many revisions I'm not sure if mine is correct. Thanks in advance.
EICO 666 Tester ( 1-1-78 ) for 6CA7 tube:

FIL: 6.3
GR: 30
PL: 95
LEVERS: 11435 12111
V: 4
S: 1
LEAK: 3-4-5-8
MERIT: 3

Sorry for the late response!
Simplicity is the ultimate sophistication.
~ Leonardo da Vinci
Post Reply