Re: Alternative cabinet materials
Posted: Sat Jul 09, 2022 2:52 pm
Some progress on the inner shell.
I bought a cheap dovetail jig I found at Horror Freight, $34, only to find internal steel guide posts preventing anything over 12" wide from being used.
So it was Skill saw, jigsaw and coping saw to cut the finger joints.
Fine tuning edges with a chisel left a few marks, so I'll rub some dirt on them and walk it off. Glueup Inner shell finished.
I bought a cheap dovetail jig I found at Horror Freight, $34, only to find internal steel guide posts preventing anything over 12" wide from being used.
So it was Skill saw, jigsaw and coping saw to cut the finger joints.
Fine tuning edges with a chisel left a few marks, so I'll rub some dirt on them and walk it off. Glueup Inner shell finished.