Crate Stealth Head to 2x12 conversion
Moderators: pompeiisneaks, Colossal
Crate Stealth Head to 2x12 conversion
My friend is getting a little long in the tooth to be lugging around Crate Stealth head and 4x12 Jackson cab so I built this 2x12 Bluesbreaker style combo cab. Still a bit heavy but not near as bad as before!
- Attachments
-
- Crate back.jpg (10.23 KiB) Viewed 2455 times
-
- Crate top.jpg (24.6 KiB) Viewed 2455 times
-
- Crate front.jpg (12.47 KiB) Viewed 2455 times
If it don't get hot and glow, I don't want it !
-
- Posts: 4597
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Crate Stealth Head to 2x12 conversion
Yes Any type of wood is a good amount lighter then particle board!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
- Leo_Gnardo
- Posts: 2583
- Joined: Thu Sep 27, 2012 1:33 pm
- Location: Dogpatch-on-Hudson
Re: Crate Stealth Head to 2x12 conversion
Looks great, show off some real wood grain! Now if you can get him convinced to load it up with some neodymium magnet speakers, it should just about float off the ground. Well, save another 10 pounds or so anyway.
down technical blind alleys . . .