Hi I built a other one Express with Marshall 70'S associated parts...
Most of all NOS parts with Heyboer transformer
take a look !
Thanks !
rate my work please
Moderators: pompeiisneaks, Colossal
rate my work please
You do not have the required permissions to view the files attached to this post.
Last edited by DaveWell on Mon Oct 08, 2018 12:10 am, edited 2 times in total.
Re: rate my work please
Really nice clean work. Looks good!
It may just be the angle and lighting of your pictures, but it seems the chassis hole through which the OT secondary leads pass is missing a grommet.
If so, might be worth adding one.
Mike
It may just be the angle and lighting of your pictures, but it seems the chassis hole through which the OT secondary leads pass is missing a grommet.
If so, might be worth adding one.
Mike
Re: rate my work please
Obsessive AND compulsive. A+!
I build and repair tube amps. http://amps.monkeymatic.com
-
pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: rate my work please
I rate it an F, just send it to me so I can 'fix' it
By playing it for hours and hours
Looks outstanding, nicely done!
~Phil
By playing it for hours and hours
Looks outstanding, nicely done!
~Phil
tUber Nerd!
-
dorrisant
- Posts: 2635
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: rate my work please
Very nice!
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: rate my work please
WOW !
Thanks you All !
This Amp is for Sale ...by the way !
Thanks you All !
This Amp is for Sale ...by the way !
-
Reeltarded
- Posts: 9960
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: rate my work please
Firstly.. that looks fantastic!
Ok, where do I get that board material? I have a Marshall project waiting 2 decades and the only thing stopping it is board material that doesn't look like a clown dumped a cartoon in my amp.
Ok, where do I get that board material? I have a Marshall project waiting 2 decades and the only thing stopping it is board material that doesn't look like a clown dumped a cartoon in my amp.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: rate my work please
Nice, tidy work. What's going on with the negative feedback? Purple coupled to yellow under the board?
Re: rate my work please
Hey !
Thanks !
Winder, The NFB yellow wire was coupled to a purple. yep...OCD from me, matching color of POT side...
Reeltarded, got Board from a freind, phenolic and Bakelite, constructed of a melamine resin with fiberglass fabric reinforcement. I still have board material left over... let me check and i can send you some dimenson as you needed.
we keep in toutch !
Best Regards to ALL !
Dave
Thanks !
Winder, The NFB yellow wire was coupled to a purple. yep...OCD from me, matching color of POT side...
Reeltarded, got Board from a freind, phenolic and Bakelite, constructed of a melamine resin with fiberglass fabric reinforcement. I still have board material left over... let me check and i can send you some dimenson as you needed.
we keep in toutch !
Best Regards to ALL !
Dave
-
kanderson70
- Posts: 66
- Joined: Thu May 17, 2018 12:09 am
- Location: NW Arkansas
- Contact:
Re: rate my work please
Wow. Just wow. Really nice clean work. I bet it screams.
Builds like these are the reason I should never ever post pics of my builds
Builds like these are the reason I should never ever post pics of my builds
Re: rate my work please
Professional level work.
Re: rate my work please
I also see the missing grommet. Are there other missing grommets under the PS Board?
It looks great.
It looks great.
-
RockinRocket
- Posts: 634
- Joined: Sun Nov 20, 2011 5:23 am
Re: rate my work please
The clean ,OCD wiring is way to perfect to pass off as a TW
No need for a gourmet IMO just sand the edges down smooth.
No need for a gourmet IMO just sand the edges down smooth.
Re: rate my work please
You have to be careful with phenolic board material it can be conductive.
The earthing on this amp a bit different, I have wondered how Trainwreck amps make a good earth connection with the wooden front panel.
http://www.merrenaudio.com/perf_boards_and_end_blocks
The earthing on this amp a bit different, I have wondered how Trainwreck amps make a good earth connection with the wooden front panel.
http://www.merrenaudio.com/perf_boards_and_end_blocks
Yours Sincerely
Mark Abbott
Mark Abbott
Re: rate my work please
SOOOOOO ! happy today !
Sold this amp !
Finally !
the guy swap the 2 EL34 for 2 6V6 and it sound AWSOME !
is 1850$ USD is a fair price ?
Sold this amp !
Finally !
the guy swap the 2 EL34 for 2 6V6 and it sound AWSOME !
is 1850$ USD is a fair price ?
You do not have the required permissions to view the files attached to this post.
Last edited by DaveWell on Fri Oct 19, 2018 1:25 am, edited 1 time in total.