board dimensions for a wreck

[rhinson]

hello, does anyone know off the top of their head the dimensions for each of the parts boards in a wreck? i think the preamp board is about 2"x 9" but i'm not sure about the board with the diodes, bias supply, etc. any help or corrections is appreciated. thanks a lot rh

[UR12]

The PS board is 3.5" x 4.5" there is a 1/4 offset on one side 2 inches from the corner.

[rhinson]

hello, thanks very much for the info. on the power board. am i correct that the preamp board is 2"x9"? thanks rh

[UR12]

I'm not sure about the exact size, but I think the hole spacing on the perfboard is .265". I counted the holes and it is 8 hole wide and 40 holes long. That comes out to ruffly 2" x 10".

[rhinson]

hello, good enough for me----thanks a lot. rh