Using aluminium wirewound as express choke?

Express, Liverpool, Rocket, Dirty Little Monster, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
azatplayer
Posts: 556
Joined: Thu Feb 26, 2009 7:59 pm
Location: Great Southland

Using aluminium wirewound as express choke?

Post by azatplayer »

Is there any reason not to use a 25W ally 1K resistor as the choke in an express? Inductance any different?
User avatar
Noel Grassy
Posts: 426
Joined: Thu Feb 09, 2006 5:29 am
Location: Vacuum Tube Valley-Cali

Re: Aluminum choke sub

Post by Noel Grassy »

No sir, none at all. It's probably the better choice as the cement puppies
tend to warm up and stay that way. I was going to use a 50 watter I had
[it's still smaller than a cement one @ 25W :wink: ] but I ended up using
as many Kenny correct bits as I could find.

I believe Ken would use the superior Al bodied ones
#1} If he had some in his parts drawers
#2} If he couldn't hear them some how changing his fundamental voicing.

That's merely an opinion based on Ken in print and his subsequent use of
those very resistors in his Rocket amps albeit in a different stage.


Noel Grassy.
You do not have the required permissions to view the files attached to this post.
All excellent things are as difficult as they are rare__B Spinoza
Post Reply