The Amp Garage

Darrin when you send the preamp of the bad amp to the power amp of the good amp,insert another cable or just a 1/4 plug to the return jack of the bad amp.That way you will break the connection between the preamp and the power amp of the bad amp and you should have sound only from the good amp.

www.turretboards.com has them in the values that you want.

You can also use a push pull pot for the treble and use it's switch for the mid boost.

You have a capacitor paralleled with the 100k NFB resistor.What's that for?
Edit :Just saw your answer

Hi, these sellers have that pot:
http://www.tubesandmore.com
http://www.turretboards.com
Search for Fender bias potentiometer.

I have the 22/33 OT with dual primaries.I believe that it is exact the same size as yours.Mine's code is 8k VIBRO-1 HTS-8815-1 9960750.
I think you can safely use 6l6 tubes,just take care of the speaker impedance mismatch as llemtt has already pointed out.

David this is how i have wired the din jack in my amp for the same footswitch. That way the green wire of the footswitch cable becomes the common ground.Red wire is positive for relay1,white for relay 2 and yellow for the third one. I have wired the switches like heisthl showed in his second diagram...

No need to do that Tom.You can operate three switches and their leds with a four conductor cable.Check Mdroberts BM Schematic:

Thank you so much Tony.Very nice and detailed layout.

No .It's 2.5 for five adapters.

Crap, I just noticed these are all knurled shafts.

Tom you can use this converter from Allparts.

Thanks Shad for all that info.
Sometime ago it was posted at ceriatone forum that RF's amp has no V2A snubber and V2B coupling cap is 0.01uf .Can anyone confirm if that's really the case?

Tony I never said that your layout was wrong.Original poster was confused with the different schematics and layouts that are floating around and i suggested to look at the actual photos of 124 so he wouldn't have any doubts about the correct wiring of the loop network. I hope that you didn't take th...

Roknrol wrote: I see where the disagreement is coming from. Look at this drawing I am correct based on this drawing, you are correct based on the other. If you notice the brown wire from the master volume is attached to the hot leg of the unswitched jack. In the one you are referring to the brown w...

Hi Jack
Don't know what Dogears would build but if you study the photos of 124
you will find that with no loop insert the signal bypasses the 220k/250pf pair.