Search found 4 matches
- Tue Oct 29, 2013 5:53 pm
- Forum: Technical Discussion
- Topic: Help with Dr Z airbrake clone
- Replies: 3
- Views: 1056
Re: Help with Dr Z airbrake clone
So, I've tried some different connections that another member has sent me. The thing is that I get the same results.Attenuation from step to step is very little. I took the readings with my DMM. The reading for position 1 is very weird, there is no attenuation compared to Position 0. I connected one...
- Mon Oct 14, 2013 7:16 pm
- Forum: Technical Discussion
- Topic: Help with Dr Z airbrake clone
- Replies: 3
- Views: 1056
Help with Dr Z airbrake clone
I've built the DR Z air-brake clone and I feel almost no difference on the first three positions.Either the rotary switch isn't working properly or this thing doesn't attenuate that much. I'm using a modified Bugera V55 combo running on a Jensen 100W 8 ohm speaker. I read that for more attenuation I...
- Mon Sep 23, 2013 6:38 pm
- Forum: Trainwreck Files
- Topic: Airbrake no sound
- Replies: 13
- Views: 11642
Re: Airbrake no sound
check if the brackets are in touch with the box.I had to isolate them with tape in order for the signal to flow through the resistor.
- Mon Sep 23, 2013 1:22 pm
- Forum: Trainwreck Discussion
- Topic: DIY Airbrake...
- Replies: 448
- Views: 209844
Train Wreck
Hello, I'm new in the Forum. My name is Nuno, I'm bulding the Trainwreck and would like to see if anyone could help me with this. I have everything together now, but I'm confused with the rotary switching.Where should I lock the rotary switch, it appears that the connection is not made from pins 1 t...